5 saitig

Banjosteg 5s 11/16 ca. 17,5mm

Hersteller: Hense

Banjosteg aus Bergahorn mit Ebenholzauflage für 5 saitiges Banjo einseitig schräg Höhe 11/16, 17,5mm made in Germany

6,90 €*

BS5 Banjosteg 5saitig 656

Hersteller: Gewa

Banjosteg aus Ahorn mit Ebenholzauflage vorgekerbt für 5-string Banjo Länge: 80 mm Höhe: 16 mm Fußbreite: 6 mm

4,90 €*

Banjosteg 5s 5/8 Ahorn compens

Hersteller: Hense

Banjosteg kompensiert aus Bergahorn mit Ebenholzauflage für 5 saitiges Banjo Höhe 5/8, ca 16mm made in Germany

9,95 €*

G96 5S Banjosteg 5/8 ca. 16mm

Hersteller: Grover

Grover G96 Ahorn Steg mit EbenholzaufsatzIvoroid Inlays im EbenholzSaitenkerben für 5S Banjoca.16mm Höhe

17,45 €*

Goodtime Bridge 5/8 smile 5s

Hersteller: Deering

Deering Banjo Brücke für 5 saitige Banjos ca. 1,59cm Höhe Deering quality bridge made of dense maple and ebony for premium sound. Lots of growth lines indicate a higher grade of bridge wood is used to make each Deering bridge.

29,50 €*

Details

Old Air Dried 11/16 5S

Hersteller: Dotson

Dotson Banjobrücke 5S in 11/16 Höhe Standard Saitenabstand tolle Banjobrücken aus sehr altem Ahorn, mit Hide Glue verleimt... Standard String Spacing 5 saitig in 11/16 Höhe ( ca. 17,5mm ) Standard Saitenabstand ca. 42,9mm (1-11/16) Wer ist Richie Dotson? Ein super Banjospieler , -kenner und Repaiman! Enger Freund von J.D. Crowe und Jim Mills. So beschreibt er seine Brücken in eigenen Worten: Every now and then you get a rare opportunity to make a splash in the banjo market place. The wood out of which these banjo bridges are made come from various locations and carefully salvaged, graded and hand selected for its acoustic properties and responsiveness making these banjo bridges some of the best ever produced. I get to work on some of the rarest and most expensive banjos on the planet and I know good tone when I hear it. Some of the same reasons that those old instruments sound so amazing is why these bridges also pump out amazing and even power and clarity from the lowest growling open 4th string to that screaming punch at the 22nd fret. Only hide glue is used to attach seasoned ebony tops and if the wood didn't sound good to me when I was handling it, it got turned into jigs or tossed into the scrap box. I never use curly or birds-eys and other figured wood for my bridges. Only straight-grained maple. That allows vibrations to transmit more freely. Curl and other anomalies in wood reroute the vibrations and scatter or bounce sound waves and that can pinch the tone of your banjo, in my opinion.

38,50 €*

Bridge 11/16 Höhe 5 saitig

Hersteller: Deering

Made in USA. Original Deering Brücke. (die 11/16 Brücke hat keinen eingebrannten Stempel) ca. 1,75cm Höhe Deering quality bridge made of dense maple and ebony for premium sound. Lots of growth lines indicate a higher grade of bridge wood is used to make each Deering bridge.

29,24 €*

Banjosteg 5s 1/2 Ahorn compens

Hersteller: Hense

Hense Banjosteg 5S kompensiert aus Bergahorn mit Ebenholzauflage für 5 saitiges Banjo Höhe 1/2, ca 13mm made in Germany

9,95 €*

G72 5S Banjosteg Minstrel 1/2

Hersteller: Grover

Ahorn Steg mit Ebenholzauflage Saitenkerben für 5S Banjo ca. 13mm Höhe

11,90 €*

G73 5S Banjosteg Minstrel 5/8

Hersteller: Grover

Ahorn Steg mit Ebenholzauflage Saitenkerben für 5S Banjo ca. 16mm Höhe

11,90 €*

Banjosteg 5s 1/2 Ahorn Ebenho.

Hersteller: Hense

Banjosteg Bergahorn mit Ebenholzauflage, gekerbt für 5-saitiges Banjo ca 13mm hoch made in Germany

6,90 €*

Old Air Dried 5/8 5S

Hersteller: Dotson

Dotson Banjo Bridge 5/8 in standard Saitenabstand tolle Banjobrücken aus sehr altem Ahorn, mit Hide Glue verleimt... Standard String Spacing 5 saitig in 5/8 Höhe ( ca. 15,9mm ) Standard Saitenabstand ca. 42,9mm (1-11/16) Wer ist Richie Dotson? Ein super Banjospieler , -kenner und Repaiman! Enger Freund von J.D. Crowe und Jim Mills. So beschreibt er seine Brücken in eigenen Worten: Every now and then you get a rare opportunity to make a splash in the banjo market place. The wood out of which these banjo bridges are made come from various locations and carefully salvaged, graded and hand selected for its acoustic properties and responsiveness making these banjo bridges some of the best ever produced. I get to work on some of the rarest and most expensive banjos on the planet and I know good tone when I hear it. Some of the same reasons that those old instruments sound so amazing is why these bridges also pump out amazing and even power and clarity from the lowest growling open 4th string to that screaming punch at the 22nd fret. Only hide glue is used to attach seasoned ebony tops and if the wood didn't sound good to me when I was handling it, it got turned into jigs or tossed into the scrap box. I never use curly or birds-eys and other figured wood for my bridges. Only straight-grained maple. That allows vibrations to transmit more freely. Curl and other anomalies in wood reroute the vibrations and scatter or bounce sound waves and that can pinch the tone of your banjo, in my opinion.

38,50 €*

Banjosteg 5s 5/8 Ahorn Ebenho.

Hersteller: Hense

Banjosteg aus Bergahorn mit Ebenholzauflage für 5 saitiges Banjo Höhe 5/8, ca 16mm made in Germany

6,90 €*

G76 5S Banjosteg TuneKraft 1/2

Hersteller: Grover

Ahorn Steg mit EbenholzaufsatzSaitenkerben für 5S Banjocompensatedca.13mm Höhe

15,90 €*

G77 5S Banjosteg Tunekraft 5/8

Hersteller: Grover

Ahorn Steg mit EbenholzaufsatzSaitenkerben für 5S Banjocompensatedca.16mm Höhe

17,90 €*

Banjosteg 5s 1/2 Ahorn Einlage

Hersteller: Hense

Banjosteg Bergahorn mit Ebenholzauflage, gekerbt mit Galalitheinlagen für 5-saitiges Banjo ca 13mm hoch made in Germany

12,90 €*

Banjosteg 5s 5/8 Ahorn Einlag.

Hersteller: Hense

Banjosteg aus Bergahorn mit Ebenholzauflage mit Galalitheinlagen für 5 saitiges Banjo Höhe 5/8, ca 16mm made in Germany

12,90 €*

Smile Banjo Bridge 5/8

Hersteller: Deering

Deering Smile Banjo Bridge 5/8 Die Unterseite der Brücke ist ganz leicht gebogen und kompensiert so das leichte 'Einsinken' der Brücke ins Fell, dadurch ist die Oberseite der Brücke absolut plan und die Saiten liegen ganz parallel zum Griffbrett. Deering's new patent-pending Smile Banjo Bridge is created to fit into the natural curve created on a banjo head when under string tension. This relieves the stress found in a traditional bridge allowing the Smile Bridge to vibrate without constriction. The result is an instantly fuller and more expressive midrange, less constricted low end frequencies, and a wonderful balance across all strings.

55,00 €*

Old Air Dried .656 5S

Hersteller: Dotson

Dotson 5S Banjo Bridge 656 tolle Banjobrücken aus sehr altem Ahorn, mit Hide Glue verleimt... 5 saitig in .646 Höhe ( ca. 16,4mm ) Standard Saitenabstand ca. 42,9mm (1-11/16) Wer ist Richie Dotson? Ein super Banjospieler , -kenner und Repaiman! Enger Freund von J.D. Crowe und Jim Mills. So beschreibt er seine Brücken in eigenen Worten: Every now and then you get a rare opportunity to make a splash in the banjo market place. The wood out of which these banjo bridges are made come from various locations and carefully salvaged, graded and hand selected for its acoustic properties and responsiveness making these banjo bridges some of the best ever produced. I get to work on some of the rarest and most expensive banjos on the planet and I know good tone when I hear it. Some of the same reasons that those old instruments sound so amazing is why these bridges also pump out amazing and even power and clarity from the lowest growling open 4th string to that screaming punch at the 22nd fret. Only hide glue is used to attach seasoned ebony tops and if the wood didn't sound good to me when I was handling it, it got turned into jigs or tossed into the scrap box. I never use curly or birds-eys and other figured wood for my bridges. Only straight-grained maple. That allows vibrations to transmit more freely. Curl and other anomalies in wood reroute the vibrations and scatter or bounce sound waves and that can pinch the tone of your banjo, in my opinion.

38,50 €*

G95 5S Banjosteg Acousticraft

Hersteller: Grover

Ahorn Steg mit EbenholzaufsatzIvoroid Inlays im EbenholzSaitenkerben für 5S Banjoca.13mm Höhe

17,90 €*

Smile Banjo Bridge 11/16

Hersteller: Deering

Deering Smile Banjo Bridge 11/16 Die Unterseite der Brücke ist ganz leicht gebogen und kompensiert so das leichte 'Einsinken' der Brücke ins Fell, dadurch ist die Oberseite der Brücke absolut plan und die Saiten liegen ganz parallel zum Griffbrett. Deering's new patent-pending Smile Banjo Bridge is created to fit into the natural curve created on a banjo head when under string tension. This relieves the stress found in a traditional bridge allowing the Smile Bridge to vibrate without constriction. The result is an instantly fuller and more expressive midrange, less constricted low end frequencies, and a wonderful balance across all strings.

49,50 €*

Old Air Dried 5/8 5S Crowe

Hersteller: Dotson

Dotson Banjo Bridge 5/8 im Crowe Saiten Abstand tolle Banjobrücken aus sehr altem Ahorn, mit Hide Glue verleimt... Standard String Spacing 5 saitig in 5/8 Höhe ( ca. 15,9mm ) Saitenabstand ca. 44,5mm (Crowe Spacing 1-3/4) Wer ist Richie Dotson? Ein super Banjospieler , -kenner und Repaiman! Enger Freund von J.D. Crowe und Jim Mills. So beschreibt er seine Brücken in eigenen Worten: Every now and then you get a rare opportunity to make a splash in the banjo market place. The wood out of which these banjo bridges are made come from various locations and carefully salvaged, graded and hand selected for its acoustic properties and responsiveness making these banjo bridges some of the best ever produced. I get to work on some of the rarest and most expensive banjos on the planet and I know good tone when I hear it. Some of the same reasons that those old instruments sound so amazing is why these bridges also pump out amazing and even power and clarity from the lowest growling open 4th string to that screaming punch at the 22nd fret. Only hide glue is used to attach seasoned ebony tops and if the wood didn't sound good to me when I was handling it, it got turned into jigs or tossed into the scrap box. I never use curly or birds-eys and other figured wood for my bridges. Only straight-grained maple. That allows vibrations to transmit more freely. Curl and other anomalies in wood reroute the vibrations and scatter or bounce sound waves and that can pinch the tone of your banjo, in my opinion.

38,50 €*

Details

Old Air Dried 1/2 5S

Hersteller: Dotson

Dotson Banjo Bridge 1/2 in standard Saitenabstand tolle Banjobrücken aus sehr altem Ahorn, mit Hide Glue verleimt... Standard String Spacing 5 saitig in 1/2 Höhe ( ca. 12,7mm ) Standard Saitenabstand ca. 42,9mm (1-11/16) Wer ist Richie Dotson? Ein super Banjospieler , -kenner und Repaiman! Enger Freund von J.D. Crowe und Jim Mills. So beschreibt er seine Brücken in eigenen Worten: Every now and then you get a rare opportunity to make a splash in the banjo market place. The wood out of which these banjo bridges are made come from various locations and carefully salvaged, graded and hand selected for its acoustic properties and responsiveness making these banjo bridges some of the best ever produced. I get to work on some of the rarest and most expensive banjos on the planet and I know good tone when I hear it. Some of the same reasons that those old instruments sound so amazing is why these bridges also pump out amazing and even power and clarity from the lowest growling open 4th string to that screaming punch at the 22nd fret. Only hide glue is used to attach seasoned ebony tops and if the wood didn't sound good to me when I was handling it, it got turned into jigs or tossed into the scrap box. I never use curly or birds-eys and other figured wood for my bridges. Only straight-grained maple. That allows vibrations to transmit more freely. Curl and other anomalies in wood reroute the vibrations and scatter or bounce sound waves and that can pinch the tone of your banjo, in my opinion.

38,50 €*

Old Air Dried 11/16 5S Crowe

Hersteller: Dotson

Dotson Banjo Bridge 11/16 im Crowe Saiten Abstand tolle Banjobrücken aus sehr altem Ahorn, mit Hide Glue verleimt... Standard String Spacing 5 saitig in 11/16 Höhe ( ca. 15,9mm ) Saitenabstand ca. 44,5mm (Crowe Spacing 1-3/4) Wer ist Richie Dotson? Ein super Banjospieler , -kenner und Repaiman! Enger Freund von J.D. Crowe und Jim Mills. So beschreibt er seine Brücken in eigenen Worten: Every now and then you get a rare opportunity to make a splash in the banjo market place. The wood out of which these banjo bridges are made come from various locations and carefully salvaged, graded and hand selected for its acoustic properties and responsiveness making these banjo bridges some of the best ever produced. I get to work on some of the rarest and most expensive banjos on the planet and I know good tone when I hear it. Some of the same reasons that those old instruments sound so amazing is why these bridges also pump out amazing and even power and clarity from the lowest growling open 4th string to that screaming punch at the 22nd fret. Only hide glue is used to attach seasoned ebony tops and if the wood didn't sound good to me when I was handling it, it got turned into jigs or tossed into the scrap box. I never use curly or birds-eys and other figured wood for my bridges. Only straight-grained maple. That allows vibrations to transmit more freely. Curl and other anomalies in wood reroute the vibrations and scatter or bounce sound waves and that can pinch the tone of your banjo, in my opinion.

38,50 €*